| Table size (mm) | 1300×600 |
| Table load (kg) | eight hundred |
| Left and right stroke of worktable (x / mm) | one thousand |
| Up and down travel of headstock (Y / mm) | seven hundred and fifty |
| Front and rear stroke of worktable (Z / mm) | six hundred |
| Distance between spindle end face and worktable Center (mm) | 40~640 |
| Distance between spindle center and worktable (mm) | 190~940 |
| Table T-groove (number size x spacing) | 5-18×120 |
| Spindle model / installation dimension (mm) | BT50/Ф190 |
| Maximum spindle speed (RPM) | six thousand |
| 10. Specification of Y and Z axis ball screw | X :4010/ Y :5010/ Z :4010/ |
| 10. Y. Z axis fast moving speed (M / min) | 12 、12 、Z :12 |
| 10. Connection mode of Y and Z motors | Direct connection |
| Recommended spindle motor (kw) | 7.5 ～11 |
| Recommended x, y, Z three axis motor (nm) | X / 14, Y / 16 (band brake), Z / 16 |
| Length of guide rail shield bracket (x, Z / mm) | 630 , 380 |
| Net weight (kg) | six thousand and five hundred |
| remarks | Z-axis motor rear |
